Hunterdon County · 25 of 26 towns NJDEP Tier 1 Action level 4.0 pCi/L Free for homeowners — paid by the crews

Whitehouse Station, Readington Township

Drain tile and sump-based depressurization in Whitehouse Station

Sealing the sump and drawing suction through an existing perimeter drain loop. Efficient where the drainage is already there.

Whitehouse Station owners ask about drain tile and sump-based depressurization more than you would think for a town this size.

The situations this follows from

  • A basement that has both a water problem and a radon problem
  • A drain-tile loop that already runs the full perimeter
  • An interior perimeter drain or a French drain around the basement floor

Why this comes up in Whitehouse Station

Village addresses and the roads out from them can differ. A well here draws from the shale beneath the village, which is also where the soil gas originates. That is part of the context any crew working in Whitehouse Station has to design around.

Readington Township — the state's own numbers

40% of the 4,041 test results NJDEP holds for Readington Township were at or above the 4.0 pCi/L action level — 1,635 of them. That puts it in Tier 1 — high potential.

A compact older village core near the station with substantial later single-family development on the surrounding roads.

Practicalities in Whitehouse Station

Village lots are modest but workable; the surrounding development has generous side access.

Construction permits go through Readington Township, and installing radon mitigation for a fee anywhere in New Jersey requires NJDEP certification.

The usual approach

Where a perimeter drain already circles the footing, it is an existing distribution network for suction. The pit gets a sealed, gasketed cover with a viewing port and a pipe fitting, and the fan draws through the loop. It is often the cheapest effective system in a house that has one — and it has to be built so the pump can still be serviced.

Typical cost in Hunterdon County, NJ

$1,400 – $2,800 — typical range, not a quote. What your building needs can only be settled by a certified business that measures it on site.

The right answer depends on your specific building, which is why somebody has to measure it.

Who is allowed to do this in New Jersey

Under N.J.A.C. 7:28-27 this is not work a general contractor may take on. It requires a business certified by NJDEP for radon mitigation, with a certified mitigation specialist directing the work. We verify that on the state register, note the date, and route accordingly — but a verified certification is a fact, not a recommendation.

Want to know what a fix would actually cost?

Write down what the system is doing and what the re-test said. We'll get it to crews who diagnose rather than guess.

Get quotes in Whitehouse Station →